NX Series 4-800( Synchronous Belts) Flexographic Printing Machine
Flexographic Roll to Roll Printing Machine
This printing machine takes rubber plate as printing plate, commonly known as "aniline printing machine", "flexographic printing machine" and "relief printing machine". It’s suitable for printing polyethylene, polypropylene, cellophane and plastic film (BOPP OPP PE PVC POT, etc.), non-woven fabric, woven bags, paper and other packaging materials, It is an ideal printing equipment and used widely for food paper packaging, shopping bags, wallet bags, clothing bags and other soft packaging materials.
1. Easy to operate, accurate overdye , long life.
2. Frequency conversion speed control, saving electricity, running fluctuation is small
3. Start and stop the ink-running motor automatically by air control
4. Adopt special synchronous belt to make printing size accurate
5. It is equipped with a blowing device, in which the heating is controlled by a central thermostatic control system and controlled by groups
6. The low-roller is made of special steel, processed by special process, and electroplated with 10 silk-thick hard chrome protective lay
7. Aluminum alloy regulating wheels are processed with hard oxidation, dynamic balance, static balance treatment
8 With a cold air bellows, it can prevent printing ink adhesion and other defects. With a cold air bellows, can effectively prevent printing ink adhesion and other defects.
9. Widened synchronous belt with High precision drives, it is low noise and low vibration when work, that makes the machine more stable.
10. Plate roller gear with special helical gear, each tooth prints length of 5MM, so that the printing effect is more stable and the printing length more accurate.
|2.Printing Material :||
BOPP OPP PE PVC POT, etc.
|4.Max .Material Width||
|5.Max .Printing Lenth||
|6.Max .Material Width||
|7.Max .Mechanical Speed||
(Register precision no change during this machine speed up or down)
|10. Thickness of Plate||
As customer requirement
|11. Set of Printing Cylinder on this machine||
4 PCS(within 40cm)
|12.Set of Ceramic anilox roller||
|13. Total machine power||
|14. Machine weight||
5.5 X 2.0 X 2.8
|16. Pinch roller||
1.Body adopts 75MM thickened wall board ,all of the casting chassis and extended balance arm to enhance stability
2.Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective layer of hard chromium.
Alloy roll with hard oxidation, treating by dynamic balance, static balanced.
3.Widened synchronous belt with High precision drives, it is low noise and low vibration when work, that makes the machine more stable, plate roller gear with special helical gear, each tooth prints length of 5MM, so that the printing effect is more stable and the printing length more accurate
5.Unwind and rewind unit